Renault K-Line ECU Tool key programming and diagnostics

OBDII tool with various Renault car electronic control unit internal memory modification functions:

  • Read/Write EEPROM or FLASH
  • Clear Immobilizer Code
  • Read Immobilizer Status
  • Program Cards.

There is no need to open control unit, de-solder memory IC or connect any wires directly to it.

All functions works by OBDII connector, but any supported control unit can be connected "on the bench" using Connection Manual.

Clear Immobilizer Code function is fully automated - just press button and control unit will be cleared. ECU is ready to accept new immobilizer code after previously programmed code is cleared - no future programming is required.

Software V2.65 supports:

  • EDC15C3 (both CAN-BUS and WIRE immo systems) - Read/Write EEPROM, Read/Write FLASH, Clear Immo Code
  • EDC15C13 - Read/Write EEPROM, Read/Write FLASH, Clear Immo Code
  • SIRIUS 31H - Read/Write EEPROM, Read/Write FLASH, Clear Immo Code
  • SIRIUS 32[N] (both CAN-BUS and WIRE immo systems) - Read/Write EEPROM, Read/Write FLASH, Clear Immo Code
  • SIRIUS 34 (both CAN-BUS and WIRE immo systems) - Read/Write EEPROM, Read/Write FLASH, Clear Immo Code
  • SIRIUS 35 - Read/Write EEPROM, Read/Write FLASH, Clear Immo Code
  • EMS3132 (both CAN-BUS and WIRE immo systems) - Read/Write EEPROM, Read/Write FLASH, Clear Immo Code
  • EMS3134 (both CAN-BUS and WIRE immo systems) - Read/Write EEPROM, Read/Write FLASH, Clear Immo Code
  • SID301 - Read/Write EEPROM, Read/Write FLASH, Clear Immo Code, Clear IMPACT DETECTED, Read stored mileage
  • SIM32 - Read/Write EEPROM, Read/Write FLASH from HD64F7055, Clear Immo Code
  • SAFIR / SAFIR2 / SFR200 (35 / 55 pin connector) - Read TMS374 EEPROM, Clear Immo Code (car runs without immobilizer code)
  • IAW 6R.20 - Read/Write TMS370 EEPROM
  • IAW 6R.30 - Read TMS370 EEPROM, Clear Immo Code (car runs without immobilizer code)
  • VALEO BII for ESPACE III - Read/Write (9)08AZ60 EEPROM, Read/Write mileage, Clear for Replacement, Read transponder data, Emergency Startup
  • VALEO IMMOBILIZER for LAGUNA I Ph2 (1998-2000) - Read transponder data, Configure, Reset to VIRGIN
  • VALEO IMMOBILIZER for LAGUNA I Ph1 / SAFRANE Ph1 (1995-1996) - Read PINCODE, Reset to VIRGIN
  • INSTRUMENT CLUSTER for ESPACE III (1998-2002) - Reset odometer, Erase RF remote programming by instrument cluster connector
  • SIEMENS IMMOBILIZER for ESPACE III Ph1 (1996-1998) - Read/Write 68HC05B16 EEPROM, read transponder data
  • SIEMENS UCH for MEGANE/SCENIC ('98-'02) - Read/Write 705B32 EEPROM, Read/Write configuration, Learn Keys
  • LAGUNA II, ESPACE IV, VELSATIS, LAGUNA II Ph2, ESPACE IV Ph2, VELSATIS Ph2 - KeyCard Programming, Change VIN. Reset UCH to VIRGIN
  • MEGANE II, SCENIC II, MEGANE II Ph2, SCENIC II Ph2 - KeyCard Programming, Change VIN, Reset UCH to VIRGIN
  • INSTRUMENT CLUSTER for SCENIC II ('04-'08) - Wake-Up by CAN-BUS for repair or to check mileage, Change language and units, Change VIN, KM, Read/Write EEPROM
  • CLIO II Ph2-5, KANGOO, TRAFIC, MASTER, VIVARO, MOVANO (-'07) - Read/Write EEPROM 93C66, Key Learning, Change VIN, Reset UCH to VIRGIN
  • KANGOO I, TRAFIC, MASTER, VIVARO, MOVANO ('07-) - Key Learning, Change VIN, Reset UCH to VIRGIN
  • KANGOO II (2007-2012) - Key Programming, Change VIN, Reset BCM to VIRGIN
  • MODUS / CLIO III ELECTRIC POWER ASSISTED STEERING (TRW DAE/PAS) - Clear Immo Code, Change VIN by OBDII, erase DF002 from 24C16 dump, repair CRC
  • MEGANE/SCENIC III ELECTRIC POWER ASSISTED STEERING (NSK DAE/PAS) - Clear Immo Code, Change VIN by OBDII
  • TWINGO III ELECTRIC POWER ASSISTED STEERING (JTEKT DAE/PAS) - Clear Immo Code, Change VIN by OBDII
  • LAGUNA III (2007-2015) - KeyCard Programming, Change VIN, Reset BCM to VIRGIN
  • LAGUNA III / LATITUDE (2007-2015) - Learn ECM / ESCL in protected mode (NEW !)
  • LATITUDE (2010+) - KeyCard Programming, Change VIN, Reset BCM to VIRGIN
  • CLIO III / MODUS - Key Programming, Change VIN, Learn ECM in protected mode, Reset BCM to VIRGIN
  • CLIO III - Card Programming, Change VIN, Reset UCH to VIRGIN
  • MASTER III (2010-) - Key Programming, Change VIN, Reset BCM to VIRGIN
  • WIND (2010-2013) - Key Programming, Change VIN, Learn ECM
  • TWINGO II (2007-2013) - Key Programming, Change VIN, Learn ECM
  • TWINGO (2001-2006), LOGAN (2004-2008), SANDERO I, THALIA, SYMBOL - Key Programming, Change VIN
  • LOGAN, SANDERO, THALIA, SYMBOL (2008-2012), Duster (2010-2012) - Key Programming, Change VIN
  • MEGANE III / SCENIC III (2009-2015) - Card Programming, Change VIN, Reset BCM to VIRGIN
  • MEGANE III / SCENIC III / FLUENCE (2009-2015) - Learn ECM / ESCL in protected mode (IMPROVED !)
  • KOLEOS (2008+) - KeyCard Programming, Change VIN, Reset BCM to VIRGIN
  • EDC17 / MED17 TRICORE EEPROM DUMP CRC - Reset EEPROM dump to VIRGIN, repair block checksums
  • MEGANE III / SCENIC III / FLUENCE / LATITUDE AIRBAG (CONTINENTAL) - Erase CRASH DATA by OBDII / direct connection
  • LAGUNA III AIRBAG (AUTOLIV RC5) - Erase CRASH DATA by OBDII / direct connection
  • TWINGO II (X44) / KANGOO II (X61) AIRBAG (CONTINENTAL) - Erase CRASH DATA by OBDII / direct connection
  • MASTER III / MOVANO-B / CLIO III Ph2 / MODUS Ph2 AIRBAG (AUTOLIV) - Erase CRASH DATA by OBDII / direct connection
  • AIRBAG MODULE WITH SPC560 MCU (CONTINENTAL) - Erase CRASH DATA by OBDII / direct connection
  • MEGANE II / SCENIC II AIRBAG (AUTOLIV ACU4) - Erase CRASH DATA by OBDII / direct connection
  • CLIO II X65 AIRBAG (BOSCH AB8) - Erase CRASH DATA, Read/Write MCU internal EEPROM by OBDII / direct connection
  • ESPACE III AIRBAG (SIEMENS) - Erase CRASH DATA, Read/Write MCU internal EEPROM by OBDII / direct connection
  • LOGAN X90 / DUSTER H79 AIRBAG (TEMIC-CONTINENTAL) - Erase CRASH DATA, Read EEPROM by OBDII / direct connection
  • KADJAR / TALISMAN AIRBAG (AUTOLIV AC7 with MCU XC2336) - Erase CRASH DATA by OBDII / direct connection (NEW !)
[Sign in to view price]
​OBDII tool with various Renault car electronic control unit int
In stock
Please sign in to buy

This product cannot be added to the
cart because you are not logged in.

Add to wish list Add to comparison list

OBDII tool with various Renault car electronic control unit internal memory modification functions:

  • Read/Write EEPROM or FLASH
  • Clear Immobilizer Code
  • Read Immobilizer Status
  • Program Cards.

There is no need to open control unit, de-solder memory IC or connect any wires directly to it.

All functions works by OBDII connector, but any supported control unit can be connected "on the bench" using Connection Manual.

Clear Immobilizer Code function is fully automated - just press button and control unit will be cleared. ECU is ready to accept new immobilizer code after previously programmed code is cleared - no future programming is required.

Software V2.65 supports:

  • EDC15C3 (both CAN-BUS and WIRE immo systems) - Read/Write EEPROM, Read/Write FLASH, Clear Immo Code
  • EDC15C13 - Read/Write EEPROM, Read/Write FLASH, Clear Immo Code
  • SIRIUS 31H - Read/Write EEPROM, Read/Write FLASH, Clear Immo Code
  • SIRIUS 32[N] (both CAN-BUS and WIRE immo systems) - Read/Write EEPROM, Read/Write FLASH, Clear Immo Code
  • SIRIUS 34 (both CAN-BUS and WIRE immo systems) - Read/Write EEPROM, Read/Write FLASH, Clear Immo Code
  • SIRIUS 35 - Read/Write EEPROM, Read/Write FLASH, Clear Immo Code
  • EMS3132 (both CAN-BUS and WIRE immo systems) - Read/Write EEPROM, Read/Write FLASH, Clear Immo Code
  • EMS3134 (both CAN-BUS and WIRE immo systems) - Read/Write EEPROM, Read/Write FLASH, Clear Immo Code
  • SID301 - Read/Write EEPROM, Read/Write FLASH, Clear Immo Code, Clear IMPACT DETECTED, Read stored mileage
  • SIM32 - Read/Write EEPROM, Read/Write FLASH from HD64F7055, Clear Immo Code
  • SAFIR / SAFIR2 / SFR200 (35 / 55 pin connector) - Read TMS374 EEPROM, Clear Immo Code (car runs without immobilizer code)
  • IAW 6R.20 - Read/Write TMS370 EEPROM
  • IAW 6R.30 - Read TMS370 EEPROM, Clear Immo Code (car runs without immobilizer code)
  • VALEO BII for ESPACE III - Read/Write (9)08AZ60 EEPROM, Read/Write mileage, Clear for Replacement, Read transponder data, Emergency Startup
  • VALEO IMMOBILIZER for LAGUNA I Ph2 (1998-2000) - Read transponder data, Configure, Reset to VIRGIN
  • VALEO IMMOBILIZER for LAGUNA I Ph1 / SAFRANE Ph1 (1995-1996) - Read PINCODE, Reset to VIRGIN
  • INSTRUMENT CLUSTER for ESPACE III (1998-2002) - Reset odometer, Erase RF remote programming by instrument cluster connector
  • SIEMENS IMMOBILIZER for ESPACE III Ph1 (1996-1998) - Read/Write 68HC05B16 EEPROM, read transponder data
  • SIEMENS UCH for MEGANE/SCENIC ('98-'02) - Read/Write 705B32 EEPROM, Read/Write configuration, Learn Keys
  • LAGUNA II, ESPACE IV, VELSATIS, LAGUNA II Ph2, ESPACE IV Ph2, VELSATIS Ph2 - KeyCard Programming, Change VIN. Reset UCH to VIRGIN
  • MEGANE II, SCENIC II, MEGANE II Ph2, SCENIC II Ph2 - KeyCard Programming, Change VIN, Reset UCH to VIRGIN
  • INSTRUMENT CLUSTER for SCENIC II ('04-'08) - Wake-Up by CAN-BUS for repair or to check mileage, Change language and units, Change VIN, KM, Read/Write EEPROM
  • CLIO II Ph2-5, KANGOO, TRAFIC, MASTER, VIVARO, MOVANO (-'07) - Read/Write EEPROM 93C66, Key Learning, Change VIN, Reset UCH to VIRGIN
  • KANGOO I, TRAFIC, MASTER, VIVARO, MOVANO ('07-) - Key Learning, Change VIN, Reset UCH to VIRGIN
  • KANGOO II (2007-2012) - Key Programming, Change VIN, Reset BCM to VIRGIN
  • MODUS / CLIO III ELECTRIC POWER ASSISTED STEERING (TRW DAE/PAS) - Clear Immo Code, Change VIN by OBDII, erase DF002 from 24C16 dump, repair CRC
  • MEGANE/SCENIC III ELECTRIC POWER ASSISTED STEERING (NSK DAE/PAS) - Clear Immo Code, Change VIN by OBDII
  • TWINGO III ELECTRIC POWER ASSISTED STEERING (JTEKT DAE/PAS) - Clear Immo Code, Change VIN by OBDII
  • LAGUNA III (2007-2015) - KeyCard Programming, Change VIN, Reset BCM to VIRGIN
  • LAGUNA III / LATITUDE (2007-2015) - Learn ECM / ESCL in protected mode (NEW !)
  • LATITUDE (2010+) - KeyCard Programming, Change VIN, Reset BCM to VIRGIN
  • CLIO III / MODUS - Key Programming, Change VIN, Learn ECM in protected mode, Reset BCM to VIRGIN
  • CLIO III - Card Programming, Change VIN, Reset UCH to VIRGIN
  • MASTER III (2010-) - Key Programming, Change VIN, Reset BCM to VIRGIN
  • WIND (2010-2013) - Key Programming, Change VIN, Learn ECM
  • TWINGO II (2007-2013) - Key Programming, Change VIN, Learn ECM
  • TWINGO (2001-2006), LOGAN (2004-2008), SANDERO I, THALIA, SYMBOL - Key Programming, Change VIN
  • LOGAN, SANDERO, THALIA, SYMBOL (2008-2012), Duster (2010-2012) - Key Programming, Change VIN
  • MEGANE III / SCENIC III (2009-2015) - Card Programming, Change VIN, Reset BCM to VIRGIN
  • MEGANE III / SCENIC III / FLUENCE (2009-2015) - Learn ECM / ESCL in protected mode (IMPROVED !)
  • KOLEOS (2008+) - KeyCard Programming, Change VIN, Reset BCM to VIRGIN
  • EDC17 / MED17 TRICORE EEPROM DUMP CRC - Reset EEPROM dump to VIRGIN, repair block checksums
  • MEGANE III / SCENIC III / FLUENCE / LATITUDE AIRBAG (CONTINENTAL) - Erase CRASH DATA by OBDII / direct connection
  • LAGUNA III AIRBAG (AUTOLIV RC5) - Erase CRASH DATA by OBDII / direct connection
  • TWINGO II (X44) / KANGOO II (X61) AIRBAG (CONTINENTAL) - Erase CRASH DATA by OBDII / direct connection
  • MASTER III / MOVANO-B / CLIO III Ph2 / MODUS Ph2 AIRBAG (AUTOLIV) - Erase CRASH DATA by OBDII / direct connection
  • AIRBAG MODULE WITH SPC560 MCU (CONTINENTAL) - Erase CRASH DATA by OBDII / direct connection
  • MEGANE II / SCENIC II AIRBAG (AUTOLIV ACU4) - Erase CRASH DATA by OBDII / direct connection
  • CLIO II X65 AIRBAG (BOSCH AB8) - Erase CRASH DATA, Read/Write MCU internal EEPROM by OBDII / direct connection
  • ESPACE III AIRBAG (SIEMENS) - Erase CRASH DATA, Read/Write MCU internal EEPROM by OBDII / direct connection
  • LOGAN X90 / DUSTER H79 AIRBAG (TEMIC-CONTINENTAL) - Erase CRASH DATA, Read EEPROM by OBDII / direct connection
  • KADJAR / TALISMAN AIRBAG (AUTOLIV AC7 with MCU XC2336) - Erase CRASH DATA by OBDII / direct connection (NEW !)

Supported Renault Vehicles

Renault Vehicles:
  • Captur Ph1 2013-2016
  • Captur Ph2 2016-2019
  • Clio II Campus (2006>)
  • Clio II Symbol
  • Clio III Keycard 2006-2013
  • Clio III ( key) 2006-2013
  • Clio IV Ph1 2013-2016
  • Clio IV Ph2 2016-2019
  • Espace IV Ph1 2003-2006
  • Espace IV ph1 2006-2014 (2 button)
  • Espace IV ph1 2006-2014 (3 button)
  • Grand Espace IV Ph1 2003-2014 (2 button)
  • Grand Espace IV Ph1 2003-2014 (3 button)
  • Grand Espace IV Ph2 2003-2014 (2 button)
  • Grand Espace IV Ph2 2003-2014 (3 button)
  • Grand Scenic II Ph1 2003-2005
  • Grand Scenic II Ph2 2006-2008
  • Grand Scenic III Ph1 2009-2011
  • Grand Scenic III Ph2 2011-2015
  • Kangoo I Ph2 2003-2007
  • Kangoo II (Citan NV250) 2007-2020
  • Koleos 2007-2011
  • Laguna II Ph1 2003-2006
  • Laguna II ph2 2006-2008 (2 button)
  • Laguna II 2006-2008 (3 button)
  • Laguna III Ph1 2008-2011
  • Laguna III Ph2 2011-2015
  • Master III 2010+
  • Modus 2004+
  • Megane II Ph1 2003-2005
  • Megane II Ph2 2006-2008
  • Megane III Ph1 2009-2011
  • Megane III Ph2 2011-2015
  • Scenic II Ph1 2003-2005
  • Scenic II Ph2 2006-2008
  • Scenic III Ph1 2009-2011
  • Scenic III Ph2 2011-2015
  • Twingo II 2007-2014
  • Vel Satis Ph1
  • Vel Satis >06 (2 button)
  • Vel Satis >06 (3 button)
  • Wind

Renault ECU Tool V2.88 (updated 5/6/2019) (Renault_ECU_Tool.rar, 664 Kb) [Download]

User Manual_F-renault-ecu-tool.pdf (User_Manual_F-renault-ecu-tool.pdf, 1,473 Kb) [Download]